6/01(五)電機系/資工系 聯合專題演講

6/01 speaker：

本週五的專題演講，由電機系邀請到：長庚大學電子系工程系主任/技合處技術移轉中心主任張睿達教授，來為大家進行演講；張教授為美國德州大學奧斯汀分校電機工程博士，國立交通大學電子工程碩士畢業後，先擔任工業技術研究院電子工業研究所元件工程師 ( 1990 – 1994 )，再轉任世界先進積體電路公司資深工程師 ( 1994 – 1995 )，之後出國取得博士，回國後進入長庚大學擔任教職至今，兼具實務經驗與理論研究。機會難得，敬請踴躍出席。

張教授的簡歷如下：

Chang, Ruey-Dar received the B.S. degree in materials engineering from National Cheng Kung University, Tainan Taiwan, the M.S. degree from the Institute of Electronics, National Chiao Tung Uniersity, Hsinchu Taiwan, and Ph.D. degree in electrical engineering from the University of Texas at Austin in 1988, 1990, and 1998, respectively.

From 1990 to 1994, he was with the Electronics Research and Service Organization/Industrial Technology Research Institute (ERSO/ITRI – 工研院電子所), Hsinchu, where he was engaged in the development of process simulation and DRAM devices under the Submicron Project (次微米計畫).In 1994, he joined the Vanguard International Semiconductor Corporation (世界先進積體電路), Hsinchu, where he was responsible for DRAM device design and TCAD.

Since 1998, he has been with the Department of Electronics Engineering, Chang Gung University (長庚大學), Taoyuan, Taiwan, where he is an Associate Professor.  He currently works on CMOS process modeling, doping profile characterization, TFT technology modeling and power devices.

講題如下：

Title：

半導體元件之製程模擬